Eckman EKEMS2 - Technical Data; Assembly

- 10 -
Before assembly firstly unpack and check all parts have been supplied. If you think any parts
are missing, check the packaging again before calling the Eckman helpline on 0844 441 3011.
IV. TECHNICAL DATA
ECKMAN Code/Factory Code
EKEMS2/SF7A214
Rated Voltage
230V~ 50Hz
Rated Power:
1200W
No Load Speed of Power Unit
5800rpm
Set Weight (without power cord)
9.04 kg
Power Unit
Weight of power unit(without power cord) :3.25kg
Overall length of power unit: 90cm
Hedge Trimmer Maximum Recommended
Twig Cutting Diameter
20mm / ¾”.
Extra Extension Pole
Length 100cm
Brush Cutter
No load speed:5800rpm Cutting diameter :400mm
Weight with 60cm pole approx.1.71kg
Grass Trimmer
Weight with 60cm pole approx.1.71kg
Chainsaw Pruner
Cutting length:220mm（10’’Oregon bar and chain）
Weight with 55cm pole approx.1.6kg
Hedge Trimmer
Cutting length:400mm
40cm long reciprocating blade with full blunt
extension protection
270 degree angle-adjustable
Weight with 40cm pole approx 1.93kg
Measured Sound Power
95 dB L
WA
Guaranteed Sound Power
96 dB L
WA
Vibration Level
6,749 m/s
2
V. ASSEMBLY
It is necessary to fit the handle to the power unit and safety guard to the brush cutter/grass trimmer
accessory if you purchased this optional accessory set.
1) Fitting the “D”handle to power unit