Ecler CKL3000T - Accessories; Connecting the System

8
3.3. Accessories
Following accessories are available to complement CKL-T
systems:
• ADP: cargo restraint double stud and ring. Allows
CKL110T and CKL SM115 rigging.
• BAGCKLT: CKL110T and CKL SM115 storage and
transportation bag.
• BAGDPC118: DPC118 storage and transportation bag.
• WH200: four-piece castor wheel set, suitable for the QRA
kit.
• QRA: four fittings set. Allow assembly of WH200 castor
wheels on DPC118 unit.
It is also possible to fit all system electronics into a flight
case (ref CKLFL3 for CKL7000T system or CKLFL for CKL5000T
and CKL3000T systems). 10m connection cables are included
apart from the internal wiring and connection panel.
3.4. Connecting the system
Connection to the acoustic cabinet. This connection must be done with, at least, 3mm cable (we
recommend 6mm). The amplifier output and any of the acoustic cabinets input connectors are
SPEAKON®, being only used 1+ LIVE and 1- GND pins.
When more than one system is used, no matter which model, STACK outputs available at
connection panel should be employed. STACK outputs of any of the amplifiers of the given system can
be also used for this purpose. Please, in any case use proper quality wiring.
CAUTION:
USE EXTERNA L FILT ER OR PROCE SSOR
made by ecler s.a. barcelona spain
ACTIVE C ABI NET
STACK OUTPUT
DPC118
LOUDSPEAKER
CABINET
IMPEDANCE: 8
1+ LIVE
1- GND
2+ N.C.
2- N.C.
INPUT