Need help?Do you have a question about the Ecler nuo 2.0 and is the answer not in the manual?
General| Channels quantity | 2 channels |
|---|---|
| Digital sound processing | - bit |
| Number of EQ bands per channel | 3 |
| Booth out (RCA) | 1 |
| Phono inputs (RCA) | 2 |
Crucial safety guidelines for optimal operation, electrical shock prevention, and proper handling of the mixing unit.
Setting channel GAIN, HI, MID, LOW to center and fader to down position for initial setup.
Connecting headphones, setting LEVEL and SELECT controls for comfortable monitoring of PFL and MIX signals.
Connecting a CD player to LINE input and selecting it as the input source for playback.
Connecting the power cable to the mixer and turning it on using the MAINS INPUT switch.
Adjusting the GAIN control to achieve a 0dB level on the VU-meter for optimal signal input.
Moving the channel fader up and crossfader to the left to send the signal to the main output.
Using the XFADER SHAPE control to adjust the crossfader's curve for smooth mixing or scratching techniques.
Correct sequence for powering on audio sources, mixer, and amplifiers, and the reverse for powering off.
To Next Page
