Need help?Do you have a question about the Ecler NZA6-180 and is the answer not in the manual?
General| Power per channel @ 4 Ohms | 180 W |
|---|---|
| Bridged power @ 8 Ohms | 360 W |
| Outputs | SpeakON, Binding Posts |
| Amplifier Technology | Class D |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Cooling | Fan cooled |
| Inputs | XLR |
| Input Impedance | 20 kΩ |
| Protections | Short circuit, Overheating, Overload, DC |
Crucial safety guidelines for amplifier installation and handling to prevent damage or injury.
Guidance on proper placement, rack mounting, and airflow for optimal thermal dissipation.
Instructions for connecting the amplifier to the electrical power supply, noting cable placement.
Details on analog, balanced, line-level signal inputs and their wiring via screw terminal blocks.
Information on connecting loudspeakers to amplifier output terminal blocks, including polarity and bridge mode.
Description of the RJ-45 connector for Ethernet network connection and remote management.
Explanation of rear panel ports for remotely controlling input signal volume via external devices.
Details on connecting potentiometers, voltage sources, or dry contacts to remote control ports for attenuation.
Procedure for powering on the amplifier locally or remotely, and recommended startup sequence for audio systems.
Explanation of the function of various LEDs on the front panel, indicating signal presence, clipping, protection, and data transfer.
Overview of front panel knobs and the power key for volume adjustment and unit control.
Diagram illustrating the functional blocks and connections of the NZA amplifier.
To Next Page
