Need help?Do you have a question about the Ecler PAM300 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Impedance | 20 kΩ |
| Output Impedance | 4 Ω |
| Outputs | Speakon, Binding Posts |
| Inputs | XLR |
| THD | <0.1% |
| Cooling | Convection |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Signal-to-Noise Ratio | >100dB |
Essential safety precautions and warnings for amplifier operation and handling.
Overview of ECLER's PAM amplifier series and its advanced technology.
Guidelines for installing and positioning the amplifier for optimal cooling and stability.
Instructions for earth link switch, input signal XLR connections, and output connections.
Procedure for powering on the amplifier and using input attenuators for level control.
Explanation of SIGNAL, PROTECT, CLIP, BRIDGED, and THERMAL indicators.
Understanding the impact of 2-ohm operation on sound quality and thermal protection.
Details on optional active filter and limiter modules for enhanced performance.
Proper methods for cleaning the amplifier's front panel to avoid damage.
Detailed output power ratings and key performance metrics like SNR and damping factor.
Physical dimensions, weight, and maximum power consumption for each model.
To Next Page