EasyManua.ls Logo

Eco Drive E5-H Series User Manual

Default Icon
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V&T Technologies Co., Ltd. http://www.ecodrivecn.com
Safety Precautions
Safety Precautions
Description of safety marks:
Danger: The misuse may cause fire, severe injury, even death.
Note: The misuse may cause medium or minor injury and equipment damage.
Use
DangerDanger
This series of inverter is used to control the variable speed operation of threephase
motor and cannot be used for singlephase motor or other applications. Otherwise,
inverter failure or fire may be caused.
This series of inverter cannot be simply used in the applications directly related to the
human safety, such as the medical equipment.
This series of inverter is produced under strict quality management system. If the
inverter failure may cause severe accident or loss, safety measures, such as
redundancy or bypass, shall be taken.
Goods Arrival Inspection
NoteNote
If the inverter is found to be damaged or lack parts, the inverter cannot be installed.
Otherwise, accident may be caused.
Installation
NoteNote
When handling and installing the product, please hold the product bottom. Do not hold
the enclosure only. Otherwise, your feet may be injured and the inverter may be
damaged because of dropping.
The inverter shall be mounted on the fire retardant surface, such as metal, and kept far
away from the inflammables and heat source.
Keep the drilling scraps from falling into the inside of the inverter during the installation;
otherwise, inverter failure may be caused.
When the inverter is installed inside the cabinet, the electricity control cabinet shall be
equipped with fan and ventilation port. And ducts for radiation shall be constructed in
the cabinet.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Eco Drive E5-H Series and is the answer not in the manual?

Eco Drive E5-H Series Specifications

General IconGeneral
Output Voltage0-Input Voltage
Control ModeV/f Control, Sensorless Vector Control
Protection FunctionsOvercurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
DimensionsVaries by model
WeightVaries by model

Summary

Safety Precautions

General Safety Marks and Usage

Covers descriptions of safety marks and general usage warnings.

Installation and Wiring Safety

Details safety during installation and wiring procedures.

Operation and Maintenance Safety

Covers safe operation practices and maintenance precautions.

Chapter 2 Inverter Installation

Installation Environment and Mounting

Specifies installation site requirements and mounting directions.

Chapter 3 Wiring of Inverter

Chapter 4 Using Instructions of Operation Panel

Chapter 6 Parameter Description

Chapter 7 Fault Diagnosis

Fault and Alarm Information List

Lists potential failures, causes, and solutions.

Troubleshooting Procedures

Provides a flowchart for diagnosing faults.

Appendix C FAQ

Common Inverter Operation and Error FAQs

Addresses frequently asked questions about operation and errors.