To Next PageTo Next Page
Need help?Do you have a question about the ECO-MATIC ESC 36 and is the answer not in the manual?
Explanation of the information shown on the unit's digital display.
Explains the function of the stand-by indicator light.
Describes the purpose and meaning of the flow indicator.
How to adjust the sanitizer production level using the system control dial.
Role and importance of the gas sensor in the unit's operation and safety.
Routine operational guidelines and best practices for daily use of the ECO-matic.
Procedure for boosting sanitizer levels during heavy use or hot climates.
How to safely detach the cell from its housing for maintenance.
Instructions for preparing the specific acid solution used for cell cleaning.
Recommended salt concentrations and the importance of maintaining them.
Methods for monitoring salt levels using indicators and test kits.
Explains common ways salt is lost from the pool water.
Procedure and advice for adding salt to the pool water.
Advice on pool chemicals when using the ECO-matic system.
Importance and recommended levels of conditioner/stabilizer for sanitizer protection.
Recommended pH range and its impact on sanitizer effectiveness.
Role of TA in pH stability and its effect on cell scaling.
Impact of TH on cell scaling and its relationship with TA levels.
How to test and adjust sanitizer levels for optimal pool sanitation.
Methods and frequency for testing Total Alkalinity for water balance.
Procedures for testing and maintaining pool pH within the recommended range.
Testing for stabilizer presence and levels to protect sanitizer.
Diagnosing and resolving issues when the unit fails to power on or operate.
Identifying causes and solutions for sudden drops in pool salt levels.
Troubleshooting common causes of insufficient sanitizer output from the unit.
Addressing issues related to excessive scale buildup on the cell plates.
How to identify and fix leaks occurring at the cell head connection.
Description of the power control unit and its function.
Description of the electrolytic cell responsible for sanitizer production.
Role and source of salt in the ECO-matic system's operation.
Assessing water quality and deciding if a refill is needed before installation.
Specifies voltage compatibility for the power pack unit.
Wiring instructions for units that are supplied with a power cord.
Wiring instructions for units requiring permanent electrical connection.
How to connect bonding lugs for electrical safety and grounding.
Steps for accessing the internal components of the power pack for service.
How to connect the cell's lead to the power pack unit.
Initial actions on the first day of operation for setup.
Actions for the second day of operation to monitor and adjust settings.
How to adjust settings based on pool conditions and test results.
General| Brand | ECO-MATIC |
|---|---|
| Model | ESC 36 |
| Category | Swimming Pool Filter |
| Language | English |
