Eco One E-1 - User Manual

User Manual
Generating Electrolyzed
Water for Cleaning
& Sanitation
Generates hypochlorous acid (HOCl) with an
ORP between +800 and +1000 (setting 3)
1. Add tap water (or purified water) up to the 1 Liter mark
2. Add 2 grams of kosher salt *
3. Add 1 tsp. of distilled white vinegar (5%) **
(optional but recommended to optimize pH)
4. Replace lid and connect power supply ***
5. Power On to generate hypochlorous acid
1. Lid
2.
Power On/O
3. Settings 3
4. Settings 2
5.
Settings 1
6. Power Connection
7. One gram spoon
8. Power supply
7
8
1
2
3
4
5
6
Press to Power On
Press once for Setting 1
Press twice for Setting 2
Press three times for Setting 3
Setting 3 – System runs for 8 minutes
Filled to 1 Liter mark – generates 100 ppm
Run 2 cycles (16 min.) to generate 200 ppm
Setting 2 – System runs for 5 minutes
Filled to 1 Liter mark – generates 60 ppm
Setting 1 – System runs for 3 minutes
Filled to 1 Liter mark – generates 40 ppm
System Overview
Power On/Off
Setting 3
Setting 2
Setting 1
Power Slot
Lid
Power supply
One gram
measuring spoon
Generating Electrolyzed Water for Cleaning & Sanitation
1 Liter mark
1. Add tap water (or purified water) up to the 1 Liter mark
2. Add 2 grams of food grade salt (NaCl) *
3. Add 1 tsp. of distilled white vinegar (5%)
(optional but recommended to optimize pH)
4. Place lid and plug-in the power supply ***
Press to Power On
Press once for Setting 1
Press twice for Setting 2
Press three times for Setting 3
Setting 3 – System runs for 8 minutes
Filled to 1 Liter mark – generates 100 ppm
Filled to 0.5 Liter mark – generates 200 ppm
Setting 2 – System runs for 5 minutes
Filled to 1 Liter mark – generates 60 ppm
(for sanitizing fruits and vegetables)
Setting 1 – System runs for 3 minutes
Filled to 1 Liter mark – generates 40 ppm
*Use only food grade salt (NaCl). It is recommended to use pure and natural salt without iodine.
**Adding vinegar will lower pH therefore allowing hypochlorous acid to be the dominant free chlorine molecule.
***Power supply must be dry.
Generates hypochlorous acid (HOCl) with an
ORP between +800 and +1000 (setting 3).
* Use only food grade salt (NaCl). It is recommended to
use pure and natural salt without iodine.
** Adding vinegar will lower pH therefore allowing
hypochlorous acid (HOCl) to be the dominant free
chlorine molecule.
*** Power supply connector must be dry.
Instructions for safe use
provided throughout
this manual.
Eco One

Summary

Generating Electrolyzed Water for Cleaning & Sanitation

How to Generate Hypochlorous Acid (HOCI)

Step-by-step guide to creating hypochlorous acid using salt and vinegar additives for cleaning and sanitation.

Operating Modes and Settings for HOCI

Details on powering the device and selecting different operational settings for HOCI generation based on desired concentration.

Generating Electrolyzed Water for Cleaning & Degreasing

How to Generate Potassium Hydroxide (KOH)

Instructions for producing potassium hydroxide solution using potassium carbonate additive for cleaning and degreasing.

Measuring Hypochlorous Acid (HOCI) Solutions

How to Measure HOCI Concentration

Guide on using chlorine test paper to determine HOCI concentration levels in sanitizing solutions.

Precautions

General Safety and Usage Precautions

Important safety guidelines and warnings for operating the appliance correctly, including electrical safety and handling.

Overview

1. Function Description
2. Important Technical Specifications
3. For Hypochlorous Acid (HOCl) Generation (Cleaning & Sanitation)
4. For Potassium Hydroxide (KOH) Generation (Cleaning & Degreasing)
5. General Device Specifications
6. Usage Features
7. Generating Hypochlorous Acid (HOCl)
8. Generating Potassium Hydroxide (KOH)
9. Measuring HOCl Concentration
10. Safety Precautions during Use
11. Maintenance Features

The Eco One device is a user-friendly system designed for generating electrolyzed water for cleaning, sanitation, and degreasing purposes. It primarily produces hypochlorous acid (HOCl) solutions for sanitation and potassium hydroxide (KOH) solutions for cleaning and degreasing.

Function Description:

The Eco One utilizes electrolysis to transform tap water and specific additives into powerful cleaning and sanitizing agents. For sanitation, it generates hypochlorous acid (HOCl), a free chlorine molecule known for its effectiveness in killing bacteria and viruses. For cleaning and degreasing, it produces potassium hydroxide (KOH). The device offers different settings to control the concentration of the generated solutions, making it versatile for various cleaning needs.

Important Technical Specifications:

For Hypochlorous Acid (HOCl) Generation (Cleaning & Sanitation):

• ORP (Oxidation-Reduction Potential): Between +800 and +1000 (achieved on Setting 3).
• Additives: Tap water (or purified water), kosher salt (NaCl), and optionally distilled white vinegar (5%).
• Salt Requirement: 2 grams of kosher salt (food grade, pure, natural, without iodine recommended).
• Vinegar Requirement: 1 tsp. of distilled white vinegar (5%) (optional, but recommended to optimize pH for HOCl dominance).
• Concentration Settings (at 1 Liter fill):
  • Setting 1: Runs for 3 minutes, generates 40 ppm HOCl.
  • Setting 2: Runs for 5 minutes, generates 60 ppm HOCl.
  • Setting 3: Runs for 8 minutes, generates 100 ppm HOCl. Running two cycles (16 minutes total) on Setting 3 generates 200 ppm HOCl.
• HOCl Properties:
  • Molecular formula: HOCl.
  • Can be measured with chlorine test paper.
  • Most dominant in a chlorine solution between pH 4 and 6.

For Potassium Hydroxide (KOH) Generation (Cleaning & Degreasing):

• ORP (Oxidation-Reduction Potential): Between -100 and -300.
• Additives: Tap water (or purified water) and potassium carbonate.
• Potassium Carbonate Requirement: 2 grams of potassium carbonate (only the specified additive should be used).
• Generation Time: Setting 3 runs for 8 minutes to generate KOH.

General Device Specifications:

• Capacity: 1 Liter mark indicated inside the pitcher.
• Power Supply: Detachable power unit provided with the appliance.
• Safety: Designed to be supplied from a separate extra-low voltage (SELV) power source to minimize electrical shock risk.

Usage Features:

Generating Hypochlorous Acid (HOCl):

1. Fill the pitcher with tap water (or purified water) up to the 1 Liter mark.
2. Add 2 grams of kosher salt using the provided one-gram spoon (two scoops).
3. Optionally, add 1 tsp. of distilled white vinegar (5%) to optimize pH.
4. Replace the lid and ensure the power supply connector is dry before connecting the power supply.
5. Press the Power On/Off button:
   • Press once for Setting 1 (3 minutes, 40 ppm).
   • Press twice for Setting 2 (5 minutes, 60 ppm).
   • Press three times for Setting 3 (8 minutes, 100 ppm; two cycles for 200 ppm).

Generating Potassium Hydroxide (KOH):

1. Fill the pitcher with tap water (or purified water) up to the 1 Liter mark.
2. Add 2 grams of potassium carbonate (only the specified additive).
3. Replace the lid and ensure the power supply connector is dry before connecting the power supply.
4. Press the Power On/Off button three times to select Setting 3. The device will run for 8 minutes to generate KOH.

Measuring HOCl Concentration:

• Use chlorine test paper, which provides a simple and reliable method.
• Color matches at 10, 50, 100, and 200 parts per million (ppm) allow for measuring concentrations between 10 and 200 ppm.

Safety Precautions during Use:

• Do not immerse the appliance base or power supply unit in water or other liquid.
• Do not clean the device in a dishwasher.
• Use only the detachable power unit provided.
• Do not operate the appliance with a damaged cord or plug.
• Store additives in a clean and dry location.
• Use only normal tap water or purified water.
• If the unit becomes damaged or leaks, immediately disconnect it from the power supply.
• The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience/knowledge, unless supervised or instructed.
• Should not be used by children, and care should be taken when used near children.

Maintenance Features:

• Cleaning the Unit: Turn the appliance off before cleaning. Rinse the unit only with tap water.
• After Use: Empty the pitcher and rinse it with tap water after each use.
• Power Supply Connector: Ensure the power supply connector is dry before connecting.

Eco One E-1 Specifications

General

Brand	Eco One
Model	E-1
Category	Air Cleaner
Language	English