To Next PageTo Next Page
Need help?Do you have a question about the Eco Spa E1 and is the answer not in the manual?
Section to record spa model, serial number, and purchase details for reference.
Covers structural integrity of the spa shell for life against defects.
Covers the spa hardcover and attached arms for life against defects.
Covers all plumbing parts for three years from the purchase date.
Covers components like pump, heater, and controls for three years.
Covers labor costs for warranty service for three years.
Lists exclusions, limitations, and liabilities not covered by the warranty.
Provides practical tips for efficient spa operation and water management.
Covers electrical safety, cord handling, and basic warnings.
Advisories for children, pregnant women, medication, health conditions, and substance use.
Details risks of high water temperatures, prolonged immersion, and exercise.
Guidelines for choosing a stable, level site with adequate access and safety considerations.
Details 110V/220V power, GFCI, and wiring needs for safe operation.
Specific advice for indoor installations, focusing on humidity and moisture.
Step-by-step instructions for filling the spa and initial power-up sequence.
Instructions for cleaning the spa shell and maintaining hard covers.
Detailed steps for cleaning and reinstalling filter cartridges.
Procedures for draining the spa and preparing it for winter storage.
Explains initial display, dry-fire protection, and temperature regulation.
Details heater cooldown process and automatic smart winter mode.
Describes the filter cycle and energy-saving economy mode settings.
Explains the visual indicators and symbols on the spa's control panel.
Operation of the OFF mode, Jets, Light, and temperature adjustment buttons.
Controls the spa's underwater Multi-Color LED mood lighting.
How to adjust the desired water temperature using WARM/COOL buttons.
Introduction to the programming menu and its available parameters.
Guide to setting clock, filter cycles, economy mode, and temperature units.
Details types of jets (Directional, Roto) and how to adjust their flow.
Explains air controls for jet pressure and diverter valve for water flow redirection.
Describes the function and maintenance of the ozone jet, suction fittings, and LED light.
Addresses shock hazards, no power, and GFCI tripping.
Diagnoses pump surging, low jet flow, and airlock conditions.
Interprets error messages and resolves spa heating problems.
Troubleshoots constant spa running and identifies potential leaks.
Diagram and labels for Model E1's jets, controls, and system access points.
Diagram and labels for Model E2's jets, controls, and system access points.
Diagram and labels for Model E3's jets, controls, and system access points.
Diagram and labels for Model E4's jets, controls, and system access points.
Details the specific wiring for 110V operation and the heater connection.
Details the specific wiring for 220V operation and the heater connection.
Instructions on accessing and configuring the GFCI breaker rating for optimal performance.
General