To Next PageTo Next Page
Need help?Do you have a question about the ECO-WORTHY 10A and is the answer not in the manual?
General| Maximum Charging Current | 10A |
|---|---|
| Input Voltage | 12V/24V Auto |
| Battery Voltage | 12V/24V |
| Charging Mode | PWM |
| Protection Features | Overcharge, Overdischarge, Short Circuit, Reverse Polarity |
| Compatible Battery Types | AGM, GEL |
| Operating Temperature | -20°C to +55°C |
Hazards of lead-acid batteries generating explosive gases during operation.
Stay near, have water, wear protection, handle acid spills, avoid sparks, remove metal items.
Remove battery, ensure ventilation, clean terminals, add water if needed, check specs, verify voltage.
Disconnect AC cord before handling DC clips. Follow steps for vehicle-installed batteries.
Ensure cord safety, clear moving parts, check polarity, and connect clips correctly based on grounding.
Steps for connecting charger to a battery not installed in a vehicle.
Charger operates automatically, switches to storage mode when fully charged.
How to connect red (+) and black (-) leads to the battery terminals.
How to initiate charging for batteries below 2.0 volts using a jump start.
How to select charging modes (STD, AGM, LI, DC, Low Temp) using the MODE key.
Explanation of symbols and indicators on the LCD screen.
Steps to select and use the Standard (Lead Acid) charging mode.
Steps to select and use the AGM battery charging mode.
Steps to select and use the LiFePO4 battery charging mode.
Detailed technical specs for 5A and 10A models: input, output, voltage, protection, temp, waterproof, recommender battery.
