Battery Equalization Description
-26-
Equalization function is added into charge controller, It reverses the buildup of
negative chemical effects like stratification, a condition where acid concentra-
tion is greater at the bottom of the battery than at the top. Equalization also
helps to remove sulfate crystals that might have built up on the plates. If left
unchecked, this condition, called sulfation, will reduce the overall capacity of
the battery. Therefore, it's recommended to equalize battery periodically.
How to Apply Equalization Function
You must enable battery equalization function in monitoring LCD setting
program 30 first. Then, you may apply this function in device by either one of
following methods:
1 .Setting equalization interval in program 35.
2.Active equalization immediately in program 36.
When to Equalize
In stage, when the setting equalization interval battery equalization cycle) is
arrived, or equalization is active immediately, the controller will start to enter
Equalize stage.
To Next Page
Loading...
Need help?
General
