Need help?Do you have a question about the Ecobee SmartSensor and is the answer not in the manual?
General| Type | Smart Sensor |
|---|---|
| Temperature Sensor | Yes |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Range | 0% to 100% |
| Wireless | Yes |
| Battery Life | Up to 5 years |
| Battery Type | CR2032 |
| Color | White |
| Compatibility | ecobee thermostats |
| Function | Detects temperature and occupancy |
Use the ecobee app to add your new SmartSensor by scanning the QR code and pulling the tab. Continue setup within the app.
Use the provided stand to place the sensor on a table or shelf. Opt for wall-mount if the spot is higher than 5 feet.
Stick sensor to the wall, cleaning the area first. Position and press adhesive for 10 seconds for secure mounting.
Sensors adjust temperature for comfort when home and savings when away, optimizing energy use.
Sensors track your location to focus comfort in the room you are currently in.
Receive alerts on your phone for abnormal temperature readings.
Equipment tested to comply with Class B digital device limits under FCC Rules for residential installations.
Device meets Innovation, Science and Economic Development Canada's licence-exempt RSS standards.
Equipment complies with FCC and IC radiation exposure limits, requiring a minimum 20cm separation from antennas.
WARNING: CHOKING HAZARD. Not for children under 3 years.
To Next Page
