13
Battery
Ecobike employs high-quality, light lithium-ion batteries. These
batteries are environmentally friendly, have a long lifespan and
high energy density, operating in a wide range of temperatures.
To insert or remove the battery, insert the battery key and turn it.
The direction of release is indicated as an arrow on the lock
In some battery models, you may additionally have to turn a knob.
A few minutes after turning off the motor assistance, the battery
will enter sleep mode. Smart BMS system inside the battery
regulates this behavior. To restart the battery, press a button on
its side. Upon the button press, the battery charge status will also
be displayed.
The battery should be charged at room temperature, on a non-
flammable and dry surface, away from heat sources, moisture or
flammable materials. Additionally, it should not be covered by anything.
1. Plug the charger cable into the battery charging socket first, and
then connect the charger cable to a power outlet. Certain battery
models may require pressing the battery status button before charging.
2. The battery has a charging indicator light. If it is red, the battery
is charging. The battery is fully charged when the indicator light turns
green.
3. After charging is complete, disconnect the cable from the socket
first and then disconnect the charger plug from the battery socket.
BATTERY ASSEMBLY/DISASSEMBLY
SLEEP MODE
CHARGING THE BATTERY
To Next Page
Loading...
