Need help?Do you have a question about the Ecoflam LINDA 23 CA SP and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Model | LINDA 23 CA SP |
| Brand | Ecoflam |
| NOx Class | 5 |
| Max working pressure | 3 bar |
| Ignition | Electronic |
| Type | Condensing |
| Fuel | Natural gas / LPG |
| Electrical supply | 230V, 50Hz |
Instructions for starting and stopping the boiler unit.
Identification and function of each control on the panel.
Important safety warnings and installation responsibilities.
Step-by-step guide for the initial startup of the boiler.
Procedures for turning off the heating system in different configurations.
Steps to safely turn off the main burner and the unit.
Procedure to reset the boiler after an overheating shutdown.
Troubleshooting steps for low water circulation.
Detailed technical data including thermal capacity, efficiency, and heat loss.
Specifications for hot water delivery and nominal gas pressures.
Diagram showing the external view and overall dimensions of the boiler.
Essential checks before connecting the boiler, including flushing and gas type verification.
Guidelines for selecting an appropriate installation location and ventilation.
Schematics for connecting the boiler's water and gas pipes.
Diagrams illustrating the hydraulic circuits for different boiler models.
Essential checks to perform before the first ignition of the boiler.
Recommended annual checks for safety, efficiency, and component integrity.
To Next Page
