Connect the pipe of the Ecoflo
®
Coco Filter while making sure to maintain a constant downslope over the entire
length of the pipe toward the dispersal area. Note that the soil under the pipes must be adequately compacted.
Ecoflo
®
Coco Filter models 2.8, 3.4 and 4.1
If you need to knock out the gravity outlet, make sure to knock out the fitting and drill the green tank skin with a 3-
½ inch hole saw.
6.1.2 Systems with pumped discharge
Ecoflo
®
Coco Filter models 5.7 and 7.3
Install the screwed adaptors provided in the component box (placed in the main access at the time of delivery of
the shell) for the pumped discharge outlet. The component box contains the 1" (25 mm) and 1.5" (38 mm) outlet
adaptors as selected by the installer.
Ecoflo
®
Coco Filter models 2.8, 3.4 and 4.1
Unscrew the cap and screw on the appropriate outlet adaptor from the component box.
To Next Page
Loading...