To Next PageTo Next Page
Need help?Do you have a question about the Ecoflo Coco Filter EC7 Series and is the answer not in the manual?
Lists materials used for the shell, covers, and filtering medium.
Provides key specifications, dimensions, and weights for models 2.8, 3.4, and 4.1.
Details technical specifications, dimensions, and capacities for models 5.7 and 7.3.
Explains the role of the septic/primary tank in wastewater clarification and pre-treatment.
Describes wastewater treatment via coconut husk fragments and microbial action.
Defines the coding system for identifying Ecoflo® Coco Filter models and features.
Outlines when a pumping station is needed and its basic requirements for feeding the biofilter.
Details the role of the discharge pump in delivering treated effluent to the dispersal system.
Covers flow dividers for multi-unit systems and guidelines for final effluent dispersal.
Illustrates system configurations for separate and one-piece (PACK) installations.
Specifies required clearances from reference points like parking areas and retaining walls.
Details site prep, tank backfilling, watertightness, and preventing contamination.
Discusses subsurface dispersal options like trenches and absorption beds for treated effluent.
Emphasizes soil permeability and infiltration capacity importance for site assessment.
Defines minimum vertical separation between infiltration area and limiting layers.
Outlines surface discharge options into watercourses, streams, or dry swales.
Shows a breakdown of individual components for standard models.
Illustrates components of the PACK option for specific models.
Provides a detailed component breakdown for larger DV models.
Guides on excavating the site and preparing a stable, level base for the filter unit.
Instructions for connecting the filter for gravity discharge, including outlet adaptors.
Steps for converting a pumped unit to a gravity discharge configuration.
Details on installing adaptors for pumped discharge outlets on various models.
Covers anchoring methods and proper backfilling techniques for unit stability and integrity.
Step-by-step instructions for assembling internal filter components like the tipping bucket.
Specific assembly steps for the larger Ecoflo® Coco Filter models.
Assembly instructions for standard models, including riser and gasket installation.
Guidelines for connecting the inlet pipe from the septic tank to the filter unit.
Specific instructions for connecting inlet pipes when an upstream pumping station is used.
Details on connecting the pumped outlet pipe, including pressure and length considerations.
Procedures for final backfilling, ensuring covers are at the correct grade, and vegetation planning.
Steps for verifying the pump and making safe electrical connections for system operation.
Pre-connection checks for the pump and internal components to ensure readiness.
Detailed instructions for wiring the pump and alarm float with appropriate connectors and breakers.
How to adjust float settings to modify the dosing volume for different site conditions.
Information on interpreting pump performance curves and locating model identification and warranty seals.
Guidelines for selecting appropriate vehicles and securing the unit during transport.
Recommended methods for safely lifting and moving the Ecoflo® Coco Filter unit.
Specific advice on using lift loops, straps, and forklifts for safe handling.
Information on how to properly configure the load on a transport vehicle for stability.
General| Brand | Ecoflo |
|---|---|
| Model | Coco Filter EC7 Series |
| Category | Water Filtration Systems |
| Language | English |
