Ecoflo Coco Filter EC7 Series - Product Nomenclature Explained

Usually the Ecoflo
®
Coco Filter model and number of units are determined based on the number of bedrooms in the
residence or the total daily volume of domestic wastewater generated per day for other type of building. The
selection of the model also depends (without limitation) on the available surface area, the topography of the lot,
depth of seasonal high groundwater table, as well as the type, permeability and depth of the natural soil on site.
There are many different models of Ecoflo
®
Coco Filters and each model has different characteristics. Unit can be
housed either in concrete, polyethylene or fiberglass reservoirs. The following table presents the different Ecoflo
®
Coco Filter models available according to the surface area of the filtering medium and treatment capacity. All of
these models are certified compliant with Standard NSF/ANSI 40.
2.2.1 Product nomenclature
There are several Ecoflo
®
Coco Filter models available that have different characteristics which are identified by the
model number.
EC7 Models Series:
Therefore, the EC7-500-P-P model refers to an Ecoflo
®
Coco Filter that can treat 500 US gallons per day, housed
into a watertight bottom polyethylene shell with an integrated pump for effluent discharge.