EN
16
1. It is recommended to clean the ice maker and ice container every time ice is made. (see Care
part)
2. Press the
maker. The water level should not be lower than the minimum scale line ( ) or exceed
the maximum scale line (MAX
LCD will prompt that the ice container is missing and the ice maker cannot work.
short press the ice making button again to select large ice/small ice, after 5 seconds with no
operation, ice making will start: the ring icon will start to rotate and the screen will show
the current time needed for ice making, a single ice making time is 8-20 minutes at room
temperature (water temperature <30°C (86°F)). Before starting ice making, you can press
the ice detaching button to cancel ice making operation, or press it to manually detach ice
from bullet-head-shaped component of the ice maker for access to ice cubes after starting
ice making.
well, then open the lid, lift one end of the ice container and then the other end, now enjoy
the ice.
1. . It is recommended to use cold water instead of hot
water. Otherwise, it will increase power consumption. If the water temperature
exceeds 50°C, the ice maker cannot work.
2. It is recommended to clean the ice maker regularly to prevent odor.
ice making sessions.
4. When making ice multiple times in a row, there will be a certain degree of
temperature increase in single/dual zones.
5. When connecting to the 12V car charging supply, the refrigerator must be
connected to the EFBX100-EB battery pack for ice making.
To Next Page
Loading...