EcoFlow Glacier - Defrosting; Error Display and Troubleshooting

To Next Page

To Previous Page

Moisture can form frost inside the refrigerator or on the evaporator. This will reduce

refrigeration capacity. Please defrost the refrigerator to avoid such situations.

• Do not use hard or sharp tools to remove ice or loosen frozen items.

• Do not use mechanical devices or other methods not recommended by the

manufacturer to speed up the defrosting process.

1. Take out all items from the refrigerator.

2. Chill them in another refrigerator if necessary.

3. Turn off the refrigerator.

4. Leave the refrigerator door open.

5. Use a clean rag to wipe off any water stains.

Fault Code Fault Name Suggested Solution

1004 Tilt angle is too large Place the device horizontally.

2004 Input is overvoltage Replace the input source.

2005 Input is undervoltage Replace the input source.

3021

Ambient temperature is

too high