2|
What's
In The Box
• Before unpacking , check the outer packing for damage, such as holes and cracks, and check the
equipment model. If any damage is found , do not unpack the package and contact the supplier as
soon as possible.
• After unpacking, check that the deliverables are intact and complete. If any item is missing or
damaged, contact the supplier.
• It is recommended to keep the original package for further needs.
Preparing Tools and
Instruments
Crimping tool
(for tubular terminal)
Hammer drill
(with a drill bit of 8mm)
Electrical Screwdriver
Screwdriver
(PH3)
Torque socket of 10mm MalletMultimeter
(DC voltage measurement
range ≥ 1000 V DC)
Cable cutter Wire strippers RJ45 Crimping tool
Marker
Crimping tool
Steel measuring tape
Cable tie
Vacuum cleaner Safety shoes Safety gloves Dust maskSafety goggles
×1
A1
×1
A2
Mounting bracketEcoFlow PowerOcean Hybrid Inverter
×1
A3
Trim cover
Wrench
(14mm)
Network cable tester
To Next Page
Loading...
