ecofort Gtech Pro ATF301 - Page 7

7
ENGLISH
Above the oor cleaning
Removing and cleaning the brush bar
...or t the extension tube with an
accessory for high-up cleaning.
To remove hair from the brush bar, run an
open pair of scissors down the groove to
cut the hair, then pull it out.
Never operate the power oor head without
the brush bar in.
For above the oor cleaning you can t the
crevice tool or dusting brush for close-to work...
Before you remove the brush bar, you will
need to remove the power oor head from
the extension tube. Rotate the latch on
the side of the powered oor head to the
‘unlock’ position and pull out the brush bar.