39
5.5. Water connection
•
pipe, the supply line should be rinsed thoroughly
in order to remove impurities.
•
•
12.3 and 12.5.
• Minimum diameter of the supply pipe must be at
•
37).
•
• Avoid long pipe lines.
•
• Avoid fittings with high pressure loss.
5.6. Air connection (MH42 / MP42)
tion 3.5.
•
pipe system must be thoroughly rinsed through in
order to remove impurities.
•
•
tings.
110005283
5.7. Supply of product (MH42 / MP42)
•
5.7.1. User pack system
Installing a user pack:
1.
2.
Rinsing the system:
110009517.
1.
2.
3. The system is now ready to be used with a new
5.7.2. Can holder system
110003498.
Installing a can:
1.
2.
3.
4.
5.
foam or spray operation.
110003498
110009517
To Next Page
Loading...
