EasyManua.ls Logo

Ecom Instruments Lite-Ex LED 30 - Zone 0;21 Usage Conditions; Dusty Ex-Area Conditions; Explosive Atmosphere Data; Product Technical Specifications

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
16
4.2 Special conditions for use in
areas of Zone 0 or 21
1. The Lite-Ex LED 30 is only certified
and permitted for used in Zone 0 or 21
providing it is secured to the user with
the provided lanyard/wrist strap.
2. The torch unit should be prevented
from being dropped.
3. The torch unit must not be left any-
where or stored in Zones 0 or 21.
4.3 Special conditions in dusty
Ex-areas
1. After each change of batteries, the
torch must be blown out or internally
cleaned with a suitable device.
2. The sealing ring must be checked for
any deterioration or damage.
5. Ex-Data
EC Certificate of Conformity No.:
ZELM 02 ATEX 0104
Ex-Designation:
II 1 G EEx ia IIC T4
II 2 D T90°C IP 52
Approved for Zone 2, 1and 0; equipment
group II, gas group IIC;
explosive gases, vapours or fog,
temperature class T4.
Approved for Zone 22 and 21; equipment
group II, explosive dusts; T90°C
6. Technical Data
Ambient operating
temperature Ta: -20°C ... +50°C
Storage temperature: -20°C ... +60°C
Batteries /
power supply: 3 x LR1 as per IEC
(see table of approved battery types)
BAL Lite-Ex LED 30.indd 16 15.10.2007 16:36:20 Uhr