Ecomax 402 - 3.3. Priming Suction Hoses

8 05.10.2015 BA-21907-006-EN
EN
3.3. PRIMING THE SUCTION HOSES
ATTENTION:
The machine has to be switched off.
– Open the door.
– Push Program buttons
➁
simultaneously.
• LEDs light up.
• In display
➇
, the LEDs 1 and 11−20 illuminate (dependent on
basic setting).
– Push Program button “1” repeatedly, until the display LED 3 lights
up.
– Close the door.
– Push Program button “1” again.
• In display
➇
LED 4 lights up.
3.3.1. DETERGENT SUCTION HOSE
– Only with built in detergent pump.
– Push and hold Program button “2”.
• Hose will be lled.
• moving light display
➇
LEDs 15−18
– Releasing the button interrupts hose priming.
3.3.2. RINSE AID SUCTION HOSE
– Push Program button “1” again.
• In display
➇
LED 5 lights up.
– Push and hold Program button “2”.
• hose will be lled.
• moving light display
➇
, LEDs 15−18
– Releasing the button interrupts hose priming.
– Termination of hose priming: Open door or do not press any button
for 30 seconds.
3. START-UP