BA-21907-006-EN 05.10.2015 7
EN
3. START-UP
Attention:
The maximum suction head of the dosing pumps is 1.5 m. Do
not confuse the containers.
Use only detergent and rinse aid for commercial applications.
Please pay attention to the manufacturer’s safety instructions.
Changing the chemical products requires to ush the supply
hoses with water. The direct contact of different types of chemi-
cals might lead to crystallization and as a consequence dam-
age of the hoses. For the ushing just proceed similar as for
the lling of the chemical hoses (see below).
3.1. DETERGENT
– Do not use any acidic detergent products with the optional built-in
detergent pump! (The ph-value has to be higher than 7)
– Place the suction hose into the external detergent container.
Fill the suction hose according to chapter section 3.3.
3.2. RINSE AID
– Place the suction hose (blue marking) into the external rinse aid
container. Fill the suction hose according to chapter section 3.3.
To Next Page
Loading...