The height of handlebar’s stem must be adjusted to the height
of the user. The desired height is the most comfortable height
to the user. Important! – To avoid component breakage, when
raising the stem, make sure that its safety line is unrevealed
to the eye!
Make sure that the wheels are well connected to the frame
and rotate freely.
Make sure that the steering system is functioning properly and
fully reactive. Also make sure that the handlebar is adjusted to
the user's height and does not exceed the safety line, as well
as that the handlebar screws are not loose.
Make sure that the wheel spokes are tightly screwed and are
not loose. And that the wheels are not missing any of them.
Be sure to check that all of the bicycle’s bearings are
operating and rotating freely (are not jittery or vibrating).
To Next Page
Loading...
