EasyManua.ls Logo

EcoMotion MINI Pro - Emphases for Battery Charging

EcoMotion MINI Pro
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emphasis for battery charging:
The battery must be charged with the provided charger only,
any other form of charger is forbidden and dangerous!
The battery must be charged only when it is in off mode (and
not emitting voltage).
The battery may be charged while assembled to the bicycle
as well as when it is unassembled.
While the battery is in charging, the charger red indicator light
is turned on, as the light turns into green the battery is fully
charged.
Before of the charging, in order to avoid circuit shortening,
the charger should be first connected to the electrical socket
and then connected to the battery.
In order to finish the charging process, the charger should
first be disconnected from the electrical socket and then
disconnected from the battery.
Do not cover the battery and the charger during charging
process.
In case in which the battery overheats during the charging
process, the charging should be stopped immediately! In
such case you must consult us at
warranty@ecomotionbikes.com.
It is normal for the charger to become somewhat hotter during
the charging process.
Do not place the battery and / or the charger near flammable
substances during charging.
The battery works better when it is fully charged, it is
recommended to begin riding when battery is fully charged.
EcoMotion Bikes
20

Related product manuals