Why does my Econ S2-MiniBox E-311 say no signal?
There are several reasons why your Econ Receiver might be showing 'No Signal'. It could be due to a weak signal level, a faulty LNB, incorrect connection of the cable from the LNB (potentially a short or open circuit), or the dish being misaligned.
What to do if there is no picture on my Econ S2-MiniBox E-311?
If there's no picture on your Econ Receiver, check if it's in Standby mode. Also, ensure the RCA jack or cable is securely connected to the video output port on your TV. Verify that the correct channel or video output is selected on your television, and that the brightness level of your TV is properly adjusted.
How to fix Econ Receiver not responding to remote?
If your Econ Receiver isn't responding to the remote, first check if the batteries are dead or inserted incorrectly. Also, make sure you are pointing the remote in the right direction.
Why is there no sound on my Econ S2-MiniBox E-311?
If there is no sound from your Econ Receiver, check if the cable is connected correctly and ensure the volume level isn't too low. Also, verify that the muting function is not active.
What causes poor picture quality on Econ S2-MiniBox E-311 Receiver?
Poor picture quality on your Econ Receiver may be due to a low signal strength.
Why haven't the settings I made in the Econ S2-MiniBox E-311 menu changed?
If settings you made in the Econ Receiver menu haven't changed, it might be because the receiver lost power before entering standby mode. This can cause some of the user-saved settings to be partially or fully deleted.
How to fix no display on Econ Receiver LED Display Panel?
If there is no display on the LED Display Panel of your Econ Receiver, ensure that the power cord is correctly plugged in.
External DC 12V Adapter.
Do not overload wall outlet, extension cord or adapter.
Keep liquids away from the HD Receiver.
Disconnect before cleaning. Use a light damp cloth.
Ensure proper airflow. Avoid direct sunlight or heaters.
Use only recommended attachments.
Disconnect mains before connecting/disconnecting LNB cable.
Place indoor to avoid lightening, rain or sunlight.
Full compliance with DVB standard, digital images, sounds.
Digital broadcasts, games, service search, Diseqc support.
Modern menu, multiple languages, remote control operation.
MPEG-Fully DVB-S / DVB-S2 (H.264) HD compliant.
6000 channels (TV and Radio) programmable.
Multilingual menu, true-color OSD, Full Picture In Graphic.
Fast channel switching, list editing, favorite list editing.
EPG, Subtitle, Teletext, Parental lock, Program transfer.
Games, Dolby Digital, Diseqc, HDMI, USB 2.0.
4 Digit LED Display, RTC, Time Shift, Video Recording.
SCART video and audio output.
Power on/off receiver, mute/unmute audio.
Select channels, enter parameters, navigate menus.
Switch TV/Radio, zoom, recall, display info.
Access main menu, exit, confirm selections.
Adjust volume, change channels, page up/down.
Play, pause, stop, teletext, subtitle functions.
FAV, FOLDER, AUDIO, V.FORMAT.
OPTION, SAT, Play Mode, USB, TMS, Play/Stop.
PAUSE, FB, FF, SB, SF, PREV/NEXT.
Remote sensor, power indicator, card slot, USB A, display.
LNB IN, HDMI, ETHERNET, SCART, DC 12V.
DC 12V adapter connection, HDMI output for TV.
Ethernet for updates, USB B for storage.
Connect to Hi-Fi system via RCA AV OUT.
Connect LNB, motor, Diseqc switch for multiple antennas.
Power on/off, standby mode, disconnect main power.
Change channels, adjust volume using remote.
Use numeric keys and OK to select channel.
Mute/unmute audio, mute OSD display.
Pause channel, resume playback.
Switch to previous channel.
Access and navigate favorite channels.
Select audio track and mode (Left/Right/Stereo/Mono).
Press INFO/RED to view channel parameters.
Use EPG key for channel listings, times, record timers.
Red for groups, Green for display mode.
Toggle between TV and Radio modes.
Press OK for list, Red for group change.
Up/Down for highlight, OK to play, Page Up/Down.
Green key to display EPG details.
Yellow key for FAV, Lock, Skip, Delete, Rename.
Blue key for sorting options: Default, FTA, Lock, Name.
Set sleep timer for automatic standby.
Green key for teletext, Yellow key for subtitle.
Use Find key to search channels by character.
Input characters to search and select channels.
Magnify areas on images.
Switch between TV and Radio/STB modes.
Access menu, exit windows.
Cycle through video resolutions (480i to 1080p).
Access Service menu, organize services/favorites.
Navigate, select, change groups, select modes.
Red key for Groups window, select/close groups.
Green key for Options, select mode, close list.
Select channels, lock/unlock them.
Select channels, use move icon, confirm position.
Select channels, use delete icon, confirm deletion.
Set channel skip or assign new names.
Search channels using keyboard input.
Add, remove, move, rename services in favorite groups.
Access FAV list, add/remove/move/rename services.
Select menus (Service, Install, System), enter items.
Configure Diseqc for satellite dish control (Disable to 16 ports).
Select satellite, LNB type, TP index, positioner, polarity.
Choose between Standard, User, Universal, Unicable.
Configure Positioner (Off, Diseqc 1.2, USALS).
Switch 22KHz tone ON/Off for signal reception.
Control 0/12V power for LNB.
Select polarity (Auto, H, V) for signal reception.
Switch Toneburst ON/Off, select LNB power levels.
Add, delete, modify transponder parameters.
Scan channels for current TP.
Scan all channels or free channels.
Automatic DiSEqC function to find satellite port.
Scan satellite directly in blind scan mode.
Automatically detect dishes and scan services.
Press OK to start scanning.
Input longitude/latitude for antenna adjustment.
Use keys for input, press OK for calculation.
Angle between south and satellite.
Select Language, Parental Lock, Timer, A/V, etc.
Set menu, audio, EPG, subtitle, teletext languages.
Select First Audio, Second Audio, Audio Priority.
Select EPG language and subtitle language.
Set teletext language for display.
Adjust display mode, aspect ratio, video output.
Switch video resolution and aspect ratio modes.
Choose between RGB or YUV output.
Set SPDIF/HDMI audio mode (LPCM, Auto).
Configure Wired/Wireless network, IP address.
Set local time, date, GMT usage.
Enable/disable GMT, set offset, control summer time.
Input date and time if channel data is unavailable.
Open timer menu, set timer number.
Set timer mode and service (TV/Radio Channel, Record).
Set timer for channel change or wakeup/sleep.
Set reminder messages (Birthday, Anniversary, General).
Set password for Installation menu and locked channels.
Enable/disable password for Installation menu.
Enable/disable password for playing locked channels.
Revise password, input new and confirm.
Adjust Subtitle Auto, Auto Power Down, Standby Mode.
Set auto standby time, panel power, and standby modes.
Upgrade software via USB.
Select USB, upgrade file, and start upgrade.
Reset receiver to factory default settings.
Confirm deletion of all channels.
Set current database as default data.
CA setting, details about inserted smart card.
View model ID, software version, loader version.
Access media files from USB storage.
Playback, rename, lock, delete recorded files.
Play video files (*.mpeg, *.ts), control playback.
Select and play MP3 files, set playlist.
Select and view image files.
Edit files/folders (rename, copy, delete).
Select time shift path.
Configure Time Shift, Record settings.
Merge time shift files with record files.
Select record type and path.
HDD format, info, and USB speed test.
Check standard and USB disk speeds.
Safely remove USB devices.
Access internet applications.
Play stream media from www.youtube.com.
View news.
View weather forecast, add cities.
Browse Google Maps.
Play Tetris, Snake, Othello.
Settings not changing, power loss.
No signal, weak signal, LNB, dish alignment.
No picture/sound, channel unavailable/scrambled.
Remote not responding, battery issues.
Poor picture, no sound, low volume, mute.
No LED display, no picture on screen, connection issues.
Processor, Memory, Tuner Type, Connector.
Signal Level, LNB Power, 22KHz Tone.
Demodulation types, Symbol Rate, FEC.
Input Voltage, Power Consumption.
Transport Stream, Input Rate, Aspect Ratio.
Video Resolution, Audio Decoding, Mode.
AV OUT(SCART), LAN, USB, HDMI ports.
Size, Weight, Operation/Storage Temperature.
To Next Page
General