Need help?Do you have a question about the Econami ECO-21P and is the answer not in the manual?
General| Model | ECO-21P |
|---|---|
| Type | Media Converter |
| Power Input | 5VDC |
| Fiber Ports | 1 x SC |
| Data Rate | 10/100Mbps |
| Standards | IEEE 802.3, IEEE 802.3u |
| Power Supply | External |
| Operating Temperature | 0°C ~ 50°C |
| Humidity | 5% ~ 90% |
Instructions for testing the locomotive's motor stall current to ensure compatibility with the decoder.
Guidance on planning the sound installation, including speaker placement and ventilation considerations.
Procedure to isolate motor brush connections from the chassis and rail pickups for safe operation.
Instructions on modifying locomotive or tender shells to accommodate the speaker and sound system.
Steps to properly fit and securely mount the speaker within the model for optimal sound.
Detailed guide on connecting the decoder wires to the locomotive components and speaker.
Final steps to test the installed decoder and locomotive for correct operation and direction.
Wiring diagram and details for the ECO-100 decoder, including optional components.
Wiring information and installation for the ECO-21P decoder with a 21-pin connector.
Wiring diagram and instructions for the ECO-400 decoder using terminal blocks.
Details of the 90-day warranty coverage for the Econami decoder.
Information and procedures for obtaining repair services for decoders outside the warranty period.
To Next Page