Need help?Do you have a question about the Econo Lift 4500 and is the answer not in the manual?
General| Brand | Econo Lift |
|---|---|
| Model | 4500 |
| Category | Boating Equipment |
| Language | English |
Lists safety rules to reduce injury risk, assembly by adults, GFCI use, cord safety, and water usage.
States product is for V-Hull/Pontoon boats and advises common sense use.
Lists required tools for assembly and installation, including wrenches, sockets, and measuring tools.
Lists all bolts, nuts, washers, and other hardware required for assembly and installation.
Instructions for placing the frame onto the tank, noting front/rear orientation.
Details on attaching J-Brackets to the frame and tank using bolts and nuts.
Instructions for sliding the tie pipe through the frame and mounting the lift arms.
How to place V-Hull bunks, end brackets, and middle brackets using bolts.
How to install Pontoon bunk brackets and boards, securing them to the frame.
Connects stabilizer bars to lift arms using specified bolts.
Attaching frame retainers to arms for stability during transport.
Guidance on measuring boat and slip to determine lift placement.
How to position the lift in the slip for even weight distribution.
Instructions for measuring and attaching dock brackets to the dock.
Connecting lift arms to the dock brackets using specified hardware.
Centering the lift frame on the arms and securing retainers.
Using water to level the lift and drilling arms for secure bolting.
Critical warning against placing the boat on the lift before arms are properly secured.
Adjusting bunk positions to match the boat or pontoon bottom.
Instructions for mounting the safety valve, flange, and control unit.
Guiding the boat onto the lift and operating the lift controls.
To Next Page