RadonEye Setup
1. Make sure your windows and doors are closed
for accurate radon measurement.
2. Connect the power cord to turn the device on.
3. Download and launch the Ecosense RadonEye app.
Allow RADONEYE to
access photos, media, and
files on your device?
Deny Allow1 of 2
Allow RADONEYE to
access this device’s
location?
Deny Allow1 of 2
4. For Android users, notification for file access is required for
exporting data and notification for location access is required when
Bluetooth is in use. Tap "Allow" when prompted with messages such
as "Allow RADONEYE to access photos, media, and files on your
device?" and “Allow RADONEYE to access this device’s location?”
5. Turn Bluetooth on to pair your phone with RADONEYE.
After pairing, your RADONEYE stays paired until you
unpair RADONEYE.
English
To Next Page
Loading...