To Next PageTo Next PageHow to fix EcoSmart A9A19A60WESDZR1 Lighting Equipment when the light cannot be turned on?
If your EcoSmart Lighting Equipment won't turn on, first, check if the power supply is on. Next, make sure the circuit breaker is in the on position. Finally, verify that the CR2450 battery is correctly installed and has power.
What to do if the EcoSmart A9A19A60WESDZR1 Lighting Equipment remote cannot control the lights?
If your EcoSmart Lighting Equipment remote isn't controlling the lights, first, ensure the LED Bulb has been successfully linked by referring to the Touch-Link solutions. Then, check that the light is within the control range. Also, verify that the CR2450 battery is correctly installed and has power.
Why is my EcoSmart Lighting Equipment unable to pair?
If you're having trouble pairing your EcoSmart Lighting Equipment, it could be due to several reasons. First, reset the bulb to factory mode. If that doesn't work, try toggling the wall switch OFF then back ON. Also, ensure the wall switch is turned ON to ensure the hub is online.
How to troubleshoot EcoSmart A9A19A60WESDZR1 when the remote cannot Touch-Link the light?
If the EcoSmart Lighting Equipment remote can't Touch-Link the light, first remove the plastic battery strip (FF). Then, ensure the CR2450 battery is correctly installed and has power. If it still fails, wait a second and try again. If Touch-Link has reached the maximum limit with 20 LED Bulbs, reset the remote and try again. If the LED Bulb has been linked with another remote, reset the light to factory default.
What to do if you are unable to control the EcoSmart Lighting Equipment bulb?
If you can't control your EcoSmart Lighting Equipment bulb, it might be due to a lost Internet connection, so ensure there is an active Internet connection. Another possibility is that the bulb is out of range, so move the hub closer to the bulb.
Why is the EcoSmart Lighting Equipment bulb slow to respond?
If your EcoSmart Lighting Equipment bulb is responding slowly, it could be due to Internet connection issues, so check with your ISP. Alternatively, there may be obstructions between the hub and the bulb, so relocate the hub closer to the bulb.
What to do if the EcoSmart A9A19A60WESDZR1 Lighting Equipment remote does not work and no indicator light is on?
If your EcoSmart Lighting Equipment remote isn't working and the indicator light is off, remove the plastic battery strip (FF). Also, make sure the CR2450 battery is installed correctly and has power.
What to do if the EcoSmart A9A19A60WESDZR1 Lighting Equipment can't pair or be controlled?
If your EcoSmart Lighting Equipment can't pair or be controlled, the bulb may have joined another network. If this is the case, reset the bulb to factory mode.
Why does the EcoSmart A9A19A60WESDZR1 bulb flicker?
If your EcoSmart Lighting Equipment bulb flickers, it might be connected to a wall dimmer. Replace the dimmer with a standard wall switch or set the dimmer to max output.
What does it mean if the EcoSmart A9A19A60WESDZR1 indicator is blinking constantly after resetting the remote?
If the EcoSmart Lighting Equipment indicator is constantly blinking after resetting the remote, it means the remote has been reset to factory default. Press any button to stop the indicator from blinking, then repeat the linking process.
General| Brand | EcoSmart |
|---|---|
| Model | A9A19A60WESDZR1 |
| Type | LED |
| Shape | A19 |
| Wattage | 9 W |
| Incandescent Equivalent | 60 W |
| Voltage | 120 V |
| Color Temperature | 2700K |
| Brightness | 800 lumens |
| Dimmable | Yes |
| Color Rendering Index (CRI) | 80 |
| Base Type | E26 |
| Lifespan | 15000 hours |
| Energy Star Certified | Yes |
Lists all items included in the smart bulb kit for user verification.
Identifies and explains the components and buttons on the remote control.
Step-by-step instructions for attaching the bracket using the provided mounting screws.
Instructions for securing the bracket to a surface using the included double-sided adhesive tape.
Details how to turn the bulb on/off and adjust its brightness level.
Describes how to change color temperature and save custom lighting presets.
Process for adding new bulbs to be controlled by the existing remote.
Step-by-step guide for pairing additional LED bulbs to the remote control.
Instructions on how to disconnect a previously paired LED bulb from the remote.
General steps for downloading, installing, and pairing the bulb with a hub app.
How to restore the LED bulb to its default factory configuration.
Steps to set up and control the bulb using Amazon Alexa voice commands.
Guide for connecting and managing the bulb through the Samsung SmartThings application.
Instructions to revert the remote and bulb to their default factory settings.
Information on battery replacement, low power indicators, and proper disposal.
Regulatory details concerning the device's compliance with FCC standards.
Addresses problems like the bulb not turning on or the remote not responding.
Provides fixes for connectivity, pairing, and control problems when using a smart hub app.
