Ecospring Service Plan
The EcoSpring hot water system you have purchased requires annual servicing to
not only extend the life of the system but keep the system performing as efficiently
as possible. With proper maintenance, you’ll ensure the best performance, cost
savings and longevity of your EcoSpring hot water system.
ECOSPRING ES300+ and HP300
Air filter clean
• The air inlet filter requires an inspection and cleaning every 3-6 months. More
often if the unit is installed in an area where there is construction dust or pollen
etc.
• The air inlet filter is situated on the top of the unit on the right-hand side. There is
a locking ring that needs to be manually turned anti - clock wise to unlock and
remove.
• The inlet filter then can be removed and cleaned under the tap and dried
before refitting.
• If there is a rain cover fitted to the top of the system, the lid of the rain cover can
be removed (4 x screws to be undone to access.)
service plan
AIR INLET
TOP COVER
AIR OUTLET
ECOSPRING - ES300+/HP300
To Next Page
Loading...
