What does error P1 mean on my EcoSpring ES300+ Water Heater?
If your EcoSpring Water Heater displays error code P1, it could be due to a system blockage, air or water or more refrigerant in the system (after repair), or a water temperature sensor malfunction. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring Water Heater displays error E0?
If your EcoSpring Water Heater displays error code E0, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring ES300+ displays error E1?
If your EcoSpring Water Heater displays error code E1, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring ES300+ Water Heater displays error E4?
If your EcoSpring Water Heater displays error code E4, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring ES300+ Water Heater displays error E5?
If your EcoSpring Water Heater displays error code E5, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring ES300+ Water Heater displays error E6?
If your EcoSpring Water Heater displays error code E6, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
What to do if my EcoSpring ES300+ Water Heater is leaking?
If you notice water leaking from your EcoSpring Water Heater, it's likely that the hydraulic pipeline joints are not sealed well. You should check and reseal all the joints to resolve this issue.
What does error LA mean on my EcoSpring ES300+ Water Heater?
It is normal, and no necessary to repair.
What does error EF mean on my EcoSpring ES300+?
If your EcoSpring Water Heater displays error code EF, it might mean the chip has been broken. The unit can still function without clock-memory, but you'll need to reset the clock when you power it on again. If necessary, contact a qualified person to service the unit.
What does error E8 mean on my EcoSpring ES300+?
If your EcoSpring Water Heater displays error code E8, it might be due to broken wires or a bad wire connection. In this case, you should contact a qualified person to service the unit.
Covers critical safety warnings and important cautions for installation and operation.
Critical warnings and cautions regarding installation hazards like leaks, shock, or fire.
Cautions on wiring, earthing, power supply specifications, and wiring diagrams.
Checklist items for location, water system piping, condensate drain, and electrical connections.
Step-by-step guide for filling the tank and preparing the unit for first-time operation.
Cautions on operating without water and procedures for draining the unit for maintenance.
Explanation of the control panel buttons and the unit's display indicators and icons.
Answers to common questions and explanation of the unit's self-protection mechanisms.
Table of error codes, common faults, possible reasons, and corrective actions.
General| Brand | EcoSpring |
|---|---|
| Model | ES300+ |
| Category | Water Heater |
| Language | English |
To Next Page
