EcoSpring ES300+ - User Manual

Other manuals for EcoSpring ES300+

Service Plan8 pages

Questions and Answers

M
michelleschmidtAug 21, 2025
Why is there no hot water coming from my EcoSpring ES300+?
- R
  Richard RomanAug 21, 2025
  If your EcoSpring Water Heater isn't producing hot water, it might be due to a few reasons. The public water supply may be ceased, or the cold water inlet pressure could be too low (less than 0.15 MPa). Alternatively, the cold water inlet valve might be closed. To resolve this, wait for the public water supply to recover, wait for the inlet water pressure to increase, or open the water inlet valve.
J
Jeremy GonzalezSep 3, 2025
What to do if my EcoSpring ES300+ displays error E2?
- S
  stephensmichaelSep 3, 2025
  If your EcoSpring Water Heater displays error code E2, it could mean that the connection between the controller and the PCB is broken, or the PCB itself has been broken. In this case, you should contact a qualified person to service the unit.
J
Jodi BryantSep 1, 2025
What to do if my EcoSpring ES300+ displays error E9?
- S
  sanchezgregorySep 1, 2025
  If your EcoSpring Water Heater displays error code E9, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
S
Sheila JonesAug 31, 2025
What to do if my EcoSpring ES300+ Water Heater displays error E7?
- L
  Lydia FrenchAug 31, 2025
  If your EcoSpring Water Heater displays error code E7, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
P
Patricia WilliamsAug 29, 2025
What to do if my EcoSpring ES300+ Water Heater displays error E6?
- K
  Kathy CamposAug 29, 2025
  If your EcoSpring Water Heater displays error code E6, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
T
Tyler RodriguezAug 28, 2025
What to do if my EcoSpring ES300+ Water Heater displays error E5?
- R
  Rebecca DeckerAug 28, 2025
  If your EcoSpring Water Heater displays error code E5, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
D
Dr. Laurie MillerAug 26, 2025
What to do if my EcoSpring ES300+ Water Heater displays error E4?
- K
  Kyle KellyAug 26, 2025
  If your EcoSpring Water Heater displays error code E4, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
E
Ethan EllisAug 25, 2025
What to do if my EcoSpring ES300+ displays error E1?
- M
  moralesnicholasAug 26, 2025
  If your EcoSpring Water Heater displays error code E1, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.
N
nicholas63Aug 23, 2025
What to do if my EcoSpring Water Heater displays error E0?
- C
  Cheryl CookAug 23, 2025
  If your EcoSpring Water Heater displays error code E0, it could mean that the connection between the sensor and the PCB is broken, or the sensor itself is broken. In this case, you should contact a qualified person to service the unit.