EcoSpring ES300+ - Performance Charts

ES300 Installation & Owner’s Manual
15
14
Installation & Owner's Manual
NOTE
While the ambient temperature below than -7 ˚C , heat pump
shift to E-heater running.
Unit disinfection unit immediately starts to heat water up to 65°C
to
kill the potential legionella bacteria inside water of tank , “ ”icon
will illuminate on the display screen during disinfection; unit will quit
disinfection if water temperature is higher than 65°
and
extinguish “ ”icon.
After pressing "Vaction" button, Unit will automatically heat water
to 15°C for the purpose of energy saving during vacation days.
- sserp>-FFO si tinu fI > unit will be unlocked->press
to set target water temperature(38-60
)->press ->unit
will automatically select heat source and start to heat water to
target temperature.
1)
2)
3)
1000
1500
2000
2500
3000
3500
4000
4500
-25 -15 -5 5 15 25 35 45
Ambient temperature( ˚C )
Capacity
15 - 45°C
15 - 50°C
15 - 55°C
15 - 60°C
0
1
2
3
4
5
6
7
8
9
-25 -15 -5 5 15 25 35 45
Ambient temperature( ˚C )
15 - 45°C
15 - 50°C
15 - 55°C
15 - 60°C
0.00
1.00
2.00
3.00
4.00
5.00
6.00
-25 -15 -5 5 15 25 35 45
Ambient temperature( ˚C )
15 - 45°C
15 - 50°C
15 - 55°C
15 - 60°C
7.2.4 Basic Function
Weekly Disinfection Function
Vacation Function
How is the Unit Running
7.2.3 Performance Charts