EasyManua.ls Logo

ECOSTAR WM08-700 - Installation of Drain Hose

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Unpacking the Unit
Ÿ
Ÿ
Ÿ
Remove package and take out the bottom board of the
cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is
strictly forbidden.
Installation of drain hose
Completely sleeve the drain hose over the sewer.
Then fit the end of the drain to the outlet of the drain outlet of washing
machine.
Fix and tighten it with a hoop. ( As shown in the figure )
Make sure that its not loose as water might drip from loose outlet.
2
Placement of water drain hose for lower drain system only
Under 3m
Under 15 cm
If the water drain hose shall be
extended, its length shall not
exceed 3 meters, otherwise it will
affect the water discharging time.
The placed height of water drain
hose shall not exceed 15 cm
Do not bend or twist the
water drain hose and
place it under the washer
Before connecting the drain hose check your drain hose model and follow the instruction:
Installation of Drain Hose
Base foamed cushion
Installation
16