4.4 SCRAPPING
Proceed with the disassembly of the machine dividing its parts based on the materials with which they were manufactured.
Followthewastemanagementanddisposalstandardsinforce.
5 SAFETY
5.1 GENERALWARNINGS
Insideofthismanualandon themachinethereareindicationsandprinted messagestogetherwiththedangersymbolshown
belowthatindicatepotentialhazard.Itwouldbebest,thereforetopaycloseattentiontowhatisshownorwritteninorderto
ensuregreatersafetyfor
theoperatorandanyoneelsewhomightbeintheoperationalrangeofthemachine.
Readthismanualbeforeusingthemachine.Onlytheinstructionsfoundinthismanualwillassistyouinusing
themachinesafelyandefficiently.
Safeusageisonlytheresultofproperoperationofthemachine,incompliancewiththestandardsand
limitationsdescribedinthismanual.Therefore,youmustknow
andcomplywithallsafetywarningsinthis
manualandthoserelativetotheproperoperationofthemachine.
5.2 USERESTRICTIONS
Donotallowanyonetousethismachinewithouthavingfirstreadandunderstoodthismanual.
Keepawayfromchildren.
Donotwearbaggyclothing,whichmaybecomeentangledinthemachine'smovingparts.
Workonlyindaylightorwithsufficientartificiallighting.
Transportofpersons,animalsorloadsonthemachineduringitsoperationortransportisseverelyprohibited.
Reduce the forward movement speed when working on a slope and when turning, so as to avoid any possibility of
losingcontrolofthemachine.
Paycloseattentionwheninthe
vicinityofanytrench,hummockordip.
Turnoffthemotorbeforeundertakinganyprocedureonthemachine.
Never workunderneath the machine orunder raised partsof the machine thathave not been safely supportedinto
positionwithblocks,andalwayswiththemotorturnedoff.
When
workingonaslopealwaysworktransversally,neverdirectlyupwardsordownwards.
Keep asafe distancefromelectrical wiresandother obstacles.Contact withelectrical wires orconductors cancause
electrocutionanddeath.
Itisobligatorythattheoperator,inordertoavoidbeingstruckbyobjectsprojected
fromthemachine,wear:
o FULLFACEPROTECTIONMASK
o COVERALLS
o SAFETYBOOTS
o GLOVES
o HAT
5.3 DANGEROUSZONES
Cuttingcomponents;
Movementtransmissioncomponents;
Neverstandinfrontoftheoperatingmachine:thereisthedangeroftheprojectionofobjectsanddebris.
Alwayskeepat
least15metresdistancefromtheoperatingmachine:intheeventofsupervisionorobservationkeepto
thesideandatasafedistance.
5.4 SAFETYDEVICES
Relative to the dangerous areas identified in the preceding paragraph, protective housings have been installed both for the
cuttingcomponentsandthetransmission.
1
Transmissionhousing
2–Cuttingbladeshousing
Figure5‐1Transmissionandcuttingbladeshousings
DONOTTAMPERWITHORREMOVETHESAFETYDEVICES.
To Next Page
Loading...
Need help?
General
