Ecotech TRT Series - General Information; Manufacturer and Machine Identification; Declarations and Conformity

2 GENERALINFORMATION

2.1 MANUFACTURERIDENTIFICATIONINFORMATION

ECOTECHITALIAViaCopernico85–47122Forlì(FC)‐Italy
Tel.0039(0)543774314Fax.0039(0)543778658E‐mail.info@ecotechitalia.com


AFTERSALESSERVICE/SPARES:
foundatResellersorAuthorisedServiceCentres:seethelistonwww.ecotechitalia.com
.

2.2 MACHINEIDENTIFICATIONRATINGPLATESANDDATA:
EachmachineisidentifiedbyaCEplateonwhichinformationconcerningthemachinehasbeenprintedindelibly.
Foranycommunicationwiththemanufacturerortheservicecentresalwayscitethefollowingreferences:





Figure2‐1CEplates

Thelocationoftheplatemayvaryfrommachinetomachine.

2.3 DECLARATIONS
The machine has been manufactured in conformity with the European Community Directives pertinent and applicable at the
momentofitsreleaseonthemarket.


2.3.1 DeclarationofConformity

DECLARATIONOFCONFORMITY
(AnnexII‐ADir.2006/42/CE)
THEMANUFACTURER

ECOTECHITALIAviaCopernico,8547100ForlìFC‐ITALY,declares,underitsexclusiveresponsibility,thattheproduct:
BrushCutterShredder–SeriesTRT–Model:60‐110‐135/60‐110‐135Swing


Type: SeriesTRT YearofManufacture: 2010


ConformstothefollowingEUregulations

 MachineDirective(Directive2006/42/EC)andtoallnationalprovisionsforimplementation;
 European Directive 2000/14/EC and lateramendments, concerningenvironmental noise emissionsof machinesand equipmentintended for
useoutdoors.

Harmonisedstandardsapplied:

UNIENISO3744:2009;UNIENISO20643:2008;
UNIENISO12100‐1:2009;UNIENISO12100‐2:2009;UNIENISO14121‐1:2007

Theperson authorizedtocompiletheTechnical ManufacturingFileisMr.RobertoRomboliatECOTECHITALIAviaCopernico,8547100ForlìFC–ITALY.
TheTechnicalManufacturingFilerequiredbytheMachineDirective2006/42/ECis
keptonfileatthecompanyoffices.
Alloftheinstructionsonusefoundinthemanualsuppliedwiththemachinemustbecompliedwithaswellasallofthesafetyandaccidentp revention
standardsinforceinthecountryofoperation.TheproductbearstheCEMark.

Date:
Jan.20,2010


Signature:



Table2‐1:ExtractoftheDeclarationofConformity
