3.5.4 Labeling quality complies with the recommendations of GOST
26828-86 and is maintained during service life under all conditions and
modes, except for labeling done on the individual package.
3.5.5 The dosimeter accepted by the Quality Control Department
(QCD) and prepared for packing is sealed with a special film seal, covering
the screw heads, which fasten together the upper and the
lower covers, or a paste seal in the hollow above the head of the
fastening screw.
3.5.6 The container in accordance with GOST 14192-96 is inscribed with:
- full name of the dosimeter;
- serial number of the dosimeter according to the numbering system of
the producer-enterprise;
- a month and a year of manufacture;
- basic marks (name of consignee and destination);
- additional signs (name of consignor and point of departure);
- information signs (gross and net weight in kg);
To Next Page
Loading...
