4.3 Use of the dosimeter
4.3.1 Safety measures during use
4.3.1.1 The dosimeter meets the safety requirements in accordance with
DSTU EN 61010-1:2014.
4.3.1.2 The dosimeter contains electric circuits of voltage up to 500 V;
dismantle the dosimeter when the power supply is switched off.
4.3.1.3 The dosimeter’s design excludes any electric voltages exceeding 42
V on the outside of the dosimeter.
4.3.1.4 A special protective jacket is used to prevent accidental contact with
conductive parts.
4.3.1.5 Ingress protection rating is IP31 according to
DSTU EN 60529:2018.
4.3.1.6 All works involving dosimeters should be performed in accordance
with the requirements of the State Sanitary Regulations DSP 6.177-2005-09-
02, State Hygiene Standards DHN 6.6.1-6.5.001 and DHN 6.6.1-6.5.061.
4.3.1.7 Disposal of dosimeters shall be carried out in accordance with
DSTU 4462.3.01, DSTU 4462.3.02, the Laws of Ukraine "On Environmental
Protection" and "On Waste".
To Next Page
Loading...
