EasyManuals Logo

ECOTEST MKS-05 TERRA-P+ User Manual

ECOTEST MKS-05 TERRA-P+
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
5.2.6 Press shortly the MODE button and make sure the dosimeter has entered the
mode of operator’s DE accumulation time indication, which is shown by blinking of
all digits and a non-blinking comma between the two pairs of digits. The last right
digit changes every minute per one unit.
5.2.7 Press shortly the MODE button and make sure the dosimeter has entered the
mode of real time indication, which is indicated by a one-second blinking comma
between the two pairs of digits.
5.2.8 Hold the MODE button pressed for six seconds to switch the dosimeter off/
Note. The batteries should be replaced if the dosimeter is switched on, and
irrespective of the chosen mode, the batteries discharge is observed (blinking of “PO3P”
discharge symbol on the LCD, and periodic brief two tone audio signals).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECOTEST MKS-05 TERRA-P+ and is the answer not in the manual?

ECOTEST MKS-05 TERRA-P+ Specifications

General IconGeneral
BrandECOTEST
ModelMKS-05 TERRA-P+
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals