46
7 Technical maintenance
7.1 General instructions
Technical maintenance includes the following operations:
- external examination;
- operability check of the dosimeter;
- power supply switch off.
7.1.1 Safety measures
Safety measures during technical maintenance fully comply with safety measures
stated in item 6.1 of the present OM.
7.1.2 External examination
External examination of the dosimeter should be performed in the following order:
a) check the technical condition of surface, inspect for integrity of seals, absence
of scratches, traces of corrosion, surface damages of the dosimeter;
b) check the condition of clamps in the battery compartment.
To Next Page
Loading...
Need help?
General
