ECOTEST MKS-05 TERRA-P+ User Manual

43
6.3.8 Indication of operator’s DE accumulation time
Press shortly the MODE button to initiate the mode of operator’s DE
accumulation time indication. This mode follows the mode of surface beta-particles
flux density measurement and value indication.
It is indicated by blinking of all digits and a non-blinking comma between the two
pairs of digits. The digits from the right to the left will indicate the following: the
first digit indicates minutes; the second one - tens of minutes; the third one - hours;
the fourth one - tens of hours.
6.3.9 Indication and correction of real time
Press shortly the MODE button to initiate the mode of real time indication. This
mode follows the mode of indication of operator’s DE accumulation time.
It is indicated by a one second blinking comma between the two pairs of the LCD digits.
The digits from the right to the left show the following: the first digit indicates minutes;
the second one - tens of minutes; the third one - hours; the fourth one - tens of hours.

ECOTEST MKS-05 TERRA-P+ Specifications

General

Brand	ECOTEST
Model	MKS-05 TERRA-P+
Category	Measuring Instruments
Language	English