ECOTEST STORA-TU RKS-01 - Page 91

89
2.3.3.11 The mode of measurement results viewing stored in the nonvolatile
memory
2.3.3.11.1 If the nonvolatile memory of the radiometer contains measurement
results, this mode can be entered from any other operating mode of the radiometer
with the help of a short press of the MODE button. This mode follows the mode of
data communications control with the PC.
In the mode of measurement results viewing stored in the nonvolatile memory
the radiometer’s LCD displays the following information (Figure 28):
- “rEAd” (1) and “Arch” (2) symbols (an indication of this mode);
- alarm clock symbol (3) (if the alarm clock is on);
- battery status symbol (4);
- number of measurement results stored in the nonvolatile memory (5).