Do you have a question about the Ecotric FAT26S900-MB Series and is the answer not in the manual?
This manual is not a detailed service or repair guide; seek qualified technician assistance.
User assumes all risks of injury, damage, or failure. Bicycle components are subject to wear and stress.
Your insurance policies may not cover accidents involving this bicycle; contact your insurer.
Do not disassemble, modify, or replace electrical parts.
Carefully remove bike from carton, remove protection, locate kit box, remove wheel/fork blocks.
Insert wheel into fork dropouts, ensure it's seated, and tighten quick release with Allen wrench.
Steps for aligning handlebars, securing stem, mounting display, and attaching front reflector.
Ensure seat post is inserted past the minimum line and tighten the clamp securely for safe riding.
Identify left/right pedals, install with correct threading (reverse for left), and tighten securely.
Recommended torque values for various bike components like handlebars, seatpost, and wheels.
Steps for locking the battery onto the frame using the key and removing it.
Connect charger, observe LED indicators (red/green), and note charging time and capacity check button.
Turn on the display by pressing the 'M' button and ensure it lights up.
Test throttle, pedal assist, and walk assist modes with the rear wheel lifted.
Test brake levers by pushing the bike forward and adjust cable tightness using caliper knobs.
Note the bike's and battery's serial numbers for case of stolen or missing items.
Explains various icons and data displayed, including speed, battery level, and assist level.
How to turn display on/off, switch ODO/Trip, change assist level, and enter walk mode.
Settings for backlight, speed unit, voltage, sleep time, assist level, wheel size, and speed limit.
Steps to diagnose and fix display power issues, involving battery charging and voltage checks.
Steps to troubleshoot when the throttle is unresponsive, checking brake levers, PAS, motor, and controller connections.
Lists common error codes displayed on the bike and their definitions/solutions.
Lists conditions and damages that void the warranty, such as water damage and improper use.
Details components covered for 18 months, including frame, motor, controller, display, and battery.
Identifies parts subject to wear and not covered by warranty, like tires and brake pads.
Outlines terms for returns within 30 days, including restocking fees and shipping responsibilities.
Explains how to get support, describe issues, and obtain spare parts under warranty.
Clarifies that DIY repairs are supported, but prior contact is recommended to avoid complications.
Addresses why the charger gets hot and factors affecting the bike's range.
Guidance on riding in moderate rain and essential battery charging practices.
Information on obtaining spare keys or replacement lock sets.
Instructions on charging times, avoiding deep discharge, and proper storage to maintain battery life.
Warnings against disassembling, exposing to liquids, extreme weather, or using unauthorized chargers.
Regular checks for bolt tightness, chain lubrication, tire pressure, and wiring care.
Advice on cleaning the ebike, avoiding high-pressure water, and recommending professional servicing.
Always wear an approved helmet and comply with local riding laws.
Check nuts, bolts, tires, brakes, and have the bike serviced by a mechanic within 100 miles.
Advise to practice in a safe area to get familiar with controls and performance.
Do not carry additional passengers; observe maximum weight limits for bike and rack.
Check tire inflation, look for damage, and ensure wheels are true and don't wobble.
Designed for riders 16+, requiring physical coordination, reaction time, and mental capability. Consult physician if impaired.
Parents are responsible for ensuring the bike fits, is safe, and the child understands operation and laws.
Children must wear helmets for riding only, not for play. Failure to comply can cause serious injury or death.
Details specifications like motor power, battery capacity, speed, range, and charging voltage.
Provides a schematic of the bike's electrical connections for reference.
Fields to record bicycle serial number, battery serial number, model, color, and purchase details.