EasyManua.ls Logo

ECOWAY LUX PRO ST2300 - TROUBLESHOOTING; POWER AND DRYER ISSUES; SEAT HEATING ISSUES

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

TROUBLESHOOTING

POWER BUTTON

Issue

Diagnoses

Solution

UNIT DOES NOT
TURN ON


Check if the power cord is
disconnected, loosen or broken.
Vérifiez si le cordon d’alimentation
est débranché, desserré ou cassé.
Plug-in the power cord if disconnected or loosen, contact Ecoway
customer service if it’s broken.
Branchez le cordon d’alimentation s’il est déconnecté ou desserré,
contactez le service client d’Ecoway s’il est cassé.
Check if the circuit breaker and
GFCI breaker are both ON.
Vérifiez si le disjoncteur ou le
disjoncteur DDFT sont tous les
deux allumés.
If either circuit breaker or GFCI breaker is off, turn it back on. Press
the reset button on the GFCI.
Si le disjoncteur ou le disjoncteur DDFT est éteint, rallumez-le.
Appuyez sur le bouton de réinitialisation sur le DDFT.
Check if the unit is powered ON.
Vérifiez si l’unité est sous tension.
Press and hold the Infinite Knob for 3 seconds until the power light
is ON.
Appuyez sur le bouton Infini et maintenez-le enfoncé pendant 3
secondes jusqu’à ce que le voyant d’alimentation s’allume.
DRYER

ONLY COLD AIR
IS BLOWN FROM
DRYER



Check temperature setting of the
dryer.
Vérifiez le réglage de la
température du sèche-linge.
Adjust dryer temperature settings according to the
operation manual.
Réglez les paramètres de température de la sécheuse
conformément au manuel d’utilisation.
If dryer setting is at warm.
Si le réglage de la sécheuse est
chaud.
The heating element of the dryer is damaged. Contact
Ecoway customer service.
L’élément chauffant du sèche-linge est endommagé. Contactez le service
client d’Ecoway.
HEATED SEAT

SEAT DOES NOT
WARM UP


Check temperature setting of
the seat.
Vérifiez le réglage de la
température du siège.
Adjust seat temperature settings according to the operation manual.
Réglez les paramètres de température du siège conformément au
manuel d’utilisation.
If seat setting is at warm.
Si le réglage du siège est
chaud.
The heating element of the seat is damaged. Contact Ecoway
customer service.
L’élément chauffant du siège est endommagé. Contactez le service
client d’Ecoway.
Warning: Do not attempt to repair the product. Turn off the shut-off valve and unplug the power cord immediately if an
issue cannot be solved by this troubleshooting manual. Contact Ecoway customer service for further assistance.
Avertissement : N’essayez pas de réparer le produit. Éteignez la vanne d’arrêt et débranchez le cordon d’alimentation
immédiatement si un problème ne peut pas être résolu par ce manuel de dépannage. Contactez le service clientèle
d’Ecoway pour obtenir de l’aide.

Related product manuals