5. Sensor Resynchronization
When the remote sensor lost reception, holding
the °C/°F and MAX button for 5s, will register
new outdoor for 12 minutes.
While in the search mode, the reception search
icon flash.
You can also re-sync the two units by removing
all the batteries and then wait for several
minutes. Then install the batteries again to
register faster.
6. Best Practices for Wireless
Communication
Note: To insure proper communication, place
the remote sensor on a flat surface. Do not lean
or upside down it to avoid any damage.
Keep the console several feet away from
computer monitors and TVs.
To Next Page
