ECOWITT WH5360 - Console Display and Temperature Issues

32
Problem
Solution
together.
3. If the sensor assembly is too close (less
than 13cm (5in), move the sensor
assembly away from the display
console.
4. Make sure the remote sensors are not
transmitting through solid metal like
aluminum siding (acts as an RF shield),
or earth barrier (down a hill).
5. Move the display console around
electrical noise generating devices, such
as computers, TVs and other wireless
transmitters or receivers.
6. Move the remote sensor to a higher
location. Move the remote sensor to a
closer location.
Temperature
reads too high in
the day time.
Make sure the console is placed in a
shaded area on the north facing wall.
Display console
contrast is weak
Replace console batteries with a fresh set
of batteries.