Do you have a question about the EcoxGear SoundExtreme SE26 and is the answer not in the manual?
Brand | EcoxGear |
---|---|
Model | SoundExtreme SE26 |
Category | Speaker System |
Language | English |
Contents include the main SoundExtreme speaker unit.
Power cable for connecting the SoundExtreme to a power source.
Connector for auxiliary power out functionality.
Includes the user guide and the remote control for the device.
Various bolts, nuts, washers, clamps, and mounts for installation.
Includes rubber feet for stability and sleeves for clamps.
Tool provided for installation and adjustments.
Identifies backlit speakers and control panel on the front.
Shows backlit woofers on the left and right sides.
Details auxiliary power out, 12V power in, and light bar connections.
Port for charging devices when the SoundExtreme is powered on.
Input for audio sources and output for amplifiers or other speakers.
Instructions for ensuring watertight seals on ports and caps.
How to attach the 8ft power cable to the 12V Power In SAE Connector.
Instructions for removing and replacing the fuse holder cap.
Alerts about continuous power draw and suggested unplugging.
Steps for connecting the unit to a gas vehicle's battery terminals.
Steps for connecting the unit to an electric vehicle's DC-DC converter.
Explains connecting black (negative/ground) and red (positive) wires.
Tip on using zip ties to manage excess wires neatly.
Explains the functions of the 4 LED indicators.
How to turn the SoundExtreme on or off.
How to cycle through different audio modes.
How to adjust speaker volume.
How to navigate tracks on a Bluetooth device.
How to cycle through speaker backlight modes.
How to cycle through light bar modes and enable accessory mode.
How to enter pairing mode or disconnect Bluetooth.
How to control music playback and calls.
Detailed meanings of Power, Bluetooth, Mode, and Status LEDs.
Step-by-step guide for powering the device on and off.
How to cycle through Bluetooth, EcoCast, FM, and AUX-IN modes.
Instructions for pairing a Bluetooth device with the SoundExtreme.
Important notes on pairing duration and automatic reconnection.
How to briefly press buttons to adjust volume by one level.
How to press and hold buttons for continuous volume control.
How to play, pause, skip tracks, and adjust volume via Bluetooth.
Instructions for answering and ending calls during music playback.
Note on controlling playback via AUX-IN using the source device.
How to use EcoTalk to activate device voice assistants like Siri or OK Google.
Prerequisites and limitations for using the EcoTalk function.
Guide to connecting two speakers for broadcasting music.
Steps to set one speaker to EcoCast Transmitting Mode.
Steps to set another speaker to EcoCast Receiving Mode.
How to connect more speakers in EcoCast Receiving Mode.
How to manage the transmitting speaker during multi-speaker setup.
Notes on automatic reconnection, compatibility, and range.
How to tune into radio stations and 'seek' for the next available one.
How to save current stations to Preset 1 or Preset 2.
How to cycle through 6 different party light modes for speakers.
How to cycle through 5 different light modes for the light bar.
How to enable the Auxiliary Power Out connection.
How to disable the Auxiliary Power Out connection.
Warning about connecting accessories to a wet connector.
Step-by-step guide to pair the remote control with the SoundExtreme.
How to use the remote for power, mode selection, and playback.
How to use the remote to control speaker backlights and light bar.
Remote controls for play, pause, track navigation, and volume.
How to use the remote to control speaker backlight modes.
How to use the remote to control light bar modes.
Using the remote switch to enable/disable accessory power output.
Steps for attaching mounts to the speaker and vehicle.
Instructions for drilling holes and using bolts for mounting.
Using worm clamps and rubber sleeves as an alternative mounting method.
Advice on using bolt mounting for high-vibration applications.
Tips for resolving distorted audio output.
Steps to take if unable to pair a Bluetooth device.
Advice for improving poor FM radio reception.
Clarification that USB ports are for charging only.
How to address low volume levels on the speaker and device.
Guidance on using LED lights and DOT compliance.
Information on how to get help for fixing the SoundExtreme.
Warning about button batteries in the remote control and ingestion risks.
Physical dimensions and unit weight.
Bluetooth compliance, frequency, range, and modulation.
Audio output power, tweeter, woofer, and mid-range speaker details.
EcoCast technology, range, and RF operating frequency.
Power supply requirements, operating temperatures, and waterproof rating.
FCC compliance declaration and interference guidelines.
Statement regarding general RF exposure requirements.
Industry Canada compliance declaration.
Guidelines for using the speaker indoors, outdoors, and near water.
Importance of clean, fitted seals for waterproofing.
Warnings against opening, wet connections, and fire hazards.
Advice on sealing caps and storing the unit to prevent moisture damage.
Warnings against powering/using a wet or dropped unit, or opening doors.
Unit is waterproof only when caps/door are properly closed.
Instructions for cleaning and drying the unit and seals.
Requirement for a 12VDC power source and potential need for a converter.
Details of the 1-year warranty, coverage, and exclusions.
Remove plastic tab and prepare remote for pairing.
Connect to power and hold the remote switch button to pair.
Check if remote buttons activate speaker lights.
Instructions on how to register the product online or by mail.
Details on the 1-year limited warranty, repair/replacement, and exclusions.
Note that registration is not proof of purchase; keep receipts.